Wastewater Operations

Constructed: 1980 – 1986 Size of Complex: 23 acres

 

The City of Sioux Falls Water Reclamation Facility was constructed from 1980 to 1986 and the design contains an extensive treatment process that includes; preliminary screening equipment, primary settling tanks, gravity thickener units, anaerobic digesters, trickling filters, activated sludge for nitrification, effluent filters, and cogeneration for electricity production and chemicals for disinfections.

The water reclamation facility is designed to treat all the domestic, industrial and commercial wastes for the City of Sioux Falls and some nearby communities. The primary reason we treat wastewater is to remove and stabilize organic waste from houses and business to prevent wastewater pollution in the Big Sioux River. Currently the City of Sioux Falls Water Reclamation Facility treats almost 32,000 pounds of organic material daily. We remove almost 99 % of all pollutants that flow into the treatment facility before the water is discharged into the Big Sioux River.

Treatment Facilities

The original design of the Water Reclamation Facility ensured there would be abundant treatment capacity for years to come. The current Water Reclamation Facility capacity includes the ability to treat:

  • 21 million gallons of waste water every day.
  • Peak hourly flows of 35 million gallons.
  • Biochemical Oxygen Demand (BOD) or Organic loading 51,240 pounds max per day.
  • Total Suspended Solids (TSS) 43,900 max pounds per day.
  • Total Kjeidahl Nitrogen (TKN) 9,440 max pounds per day.

One question commonly asked on tours is; does all the storm water come into the Water Reclamation Facility and the answer is: no. The City of Sioux Falls has a separate storm water conveyance system that carries all the storm water directly into the Big Sioux River. However, large rain events do impact the Water Reclamation Facility flows, due to rain water leaking into the wastewater collection system pipes. The City of Sioux Falls spends a good deal of time and effort to prevent as much rain water as possible from leaking into the wastewater collection system, because the storm water can cause the wastewater system to become severely overloaded and cause sewer backups into basements and overflows into streets. The City has spent millions of dollars since 2010 to replace aging sewer pipes that were leaking and in the process, has greatly reduced the amount of storm water that infiltrates into the wastewater system. The added benefit of keeping the storm water out of the sewer system is it frees up capacity of the wastewater treatment system to accommodate future growth of homes, businesses and industry in the Sioux Falls area, for years to come.

The treatment requirements for the Water Reclamation Facility are set by the South Dakota Department of Environmental and Natural Resources (DENR). The SD DENR issues all wastewater treatment plants a Surface Water Discharge Permit (insert PDF copy of discharge permit). The Permit is a legal document that lists the limits all water must meet before being discharged into the Big Sioux River.

 

On the following pages, you will be taken on a virtual tour of the Sioux Falls Water Reclamation Facility. This virtual tour will include short video segments of each treatment process and a written summary that explains each treatment process in detail.

Headwork’s Treatment

Bar Screen

The cleaning of all wastewater begins in the headwork’s area. The headwork’s area consists of: three bar screens, grit classifier, and grit chamber tank. The water first passes through the bar screens that filter out objects that are capable of damaging the treatment plant equipment. These objects usually include rocks, sticks, rags, toothbrushes, and combs these objects are screened out and then sent on to the landfill, for final disposal.

Headwork's Treatment

As the wastewater continues through the headwork’s facility, it flows through the grit chamber, which is a tank that has air pushed up through a diffuser at the bottom of the grit chamber tank. This air acts like a scrubber and removes dirt or small rocks that might have passed through the bar screen’s. The debris removed from the grit chamber treatment process is then sent to the landfill for final disposal. After the wastewater is finished with the Headwork’s treatment, it continues on to the primary settling tanks. 

Primary Settling Tanks

Now that the wastewater has all of the inorganic material removed, it can now begin the first treatment process, which starts with the Primary Settling Tanks. In the primary tanks, the wastewater flows are slowed down and all of the organic material that is heavier than water, begins to settle to the bottom of these primary tanks. During this treatment process, over 50% of the organic waste that originally came into the plant has now settled out of the wastewater stream. This is the first step of separating the organic material from the water. As the water flows through the plant, you will see that the organic solids and water separation process is repeated over and over, but by completely different methods.


Outside Primary Settling Tank

Inside Primary Settling Tank

Now the organic solids that settled to the bottom of the primary tanks are pumped to a gravity thickener. The water that leaves the primary settling tanks continues onto the next step, which is the Trickling Filters.  

Organic Solids Treatment

Inside Gravity Thickener

Gravity Thickeners The organic solids are pumped from the primary settling tanks over to a gravity thickener tank where gravity helps these organic solids thicken from 2.4% to over 6.0%. The solids thickening are important, because the gravity thickener sends a higher concentration of organic solids to the next treatment process called, Digesters.

Digesters

Sioux Falls Water Reclamation Facility has 4 digesters; three of the digesters are called “Primary Digesters” and the 4th digester is called the “Secondary Digester”. After the organic solids have been thickened in the gravity thickener they are pumped into one of three primary digesters. In the primary digesters, 3 things start to happen: 1) the solids are transformed into a more basic form of nutrients (food). 2) Anaerobic bacteria (anaerobic bacteria are bacteria that do not use oxygen) and facultative bacteria (facultative bacteria are bacteria that can live with or without oxygen). These bacteria are very hungry and immediately start to eat the nutrients that are pumped in from the gravity thickener. As these bacteria digest the nutrients they have now begun the “biological stabilization” process. That means that these bacteria are eating raw solids and it is becoming part of the bacteria cell structure and additionally the bacteria are producing a lot of acid. 3) In the third stage, the acid is consumed by other bacteria that use the acid to make methane and carbon dioxide gas.

All of these bacteria work much like the bacteria in our stomachs. They like the temperature to be about 98 degrees, stable amount of food every day, and the same things that can make a person sick, can also upset the digester microbiology; poisons, fuels, solvents, herbicides, etc. If these bacteria are adversely affected by the changes listed above, it can adversely impact the performance of the digesters, which will directly affect the digestion process of the waste inside the digesters. To prevent adverse conditions from happening, the Water Reclamation Lab staff performs regular tests on the digesters, to monitor the volatile acids, alkalinity, pH, total solids and total volatile solids in the digester. If adverse trends are detected from the lab tests then the wastewater operators will make appropriate changes to the digester operations.

The digestion process takes about 20 days to accomplish, when it’s done, the solids are now considered biosolids and can be applied to farm fields and enhance the soil nutrients for improved crop yields.

Cogeneration

There are three electrical generators at the Water Reclamation Facility that use biogas to produce electricity. Biogas is the methane gas that is produced by the bacteria that anaerobically stabilize the organic material in the digester units. On a typical day, the anaerobic bacteria can produce upwards of 240,000 cubic feet of methane gas.

Headwork's Treatment

The methane gas is used as a fuel to run gas engines that spin the generators and produce electricity. The amount of electricity produced is dependent on how many cubic feet of biogas is produced each day and typically we generate from 38% to almost 60% of the daily electricity needed to operate the treatment facility. That means on a typical day, the generators will produce 10,000 to 18,000 KW’s per day and assuming an average home uses 29 KW each day we produce enough electricity to power 620 homes a day.

Bar Screen

In the near future, the Water Reclamation Facility will install a new Fats, Oils, and Grease (FOG) facility to receive FOG and food waste that will be directly fed into the digesters. The FOG is a high gas producing material, which the bacteria in the digester consume and produce high quantities of methane gas as a byproduct in the stabilization process. Our engineering estimates indicate a potential to generate upwards of 80% of our daily electrical needs to operate the Water Reclamation Facility, from the additional quantities of biogas production.

As mentioned earlier, there are three gas engines used to drive the electric generators, to produce electricity. Two of these engine/generator units are over 30 years old and it is becoming increasingly difficult to find parts to maintain them. So looking into the future, the Water Reclamation Team has investigated a newer technology called micro-turbines that will produce electricity. These micro-turbines are very similar to small jet engines that will use the methane gas to spin the turbines, much the same way as a jet engine turbines spin. These micro-turbine engines will drive a small generator that produces electricity. One reason the Water Reclamation Team is interested in the micro-turbine technology is, this form of technology does not produce any greenhouse gas emissions, thereby, reducing the carbon footprint of the Water Reclamation Facility.  

Trickling Filters

OutsideTrickling Filters

The Sioux Falls Water Reclamation Facility trickling filter system consists of two stages of trickling filters, four first stage and four second stage trickling filters are part of the biological treatment process. The trickling filters are considered a secondary treatment phase in the overall treatment scheme of the Water Reclamation Facility and these filters are a means of bringing wastewater into contact with bacteria that grows on rocks. The bacteria resembles a slimy algae film commonly called zoogleal film and consists of diverse populations of: bacteria, protozoa, and fungi and this algae film feeds on the organic material contained in the wastewater and begins the process of stabilizing the wastewater that will eventually become a soil nutrient.

InsideTrickling Filters

After the wastewater is treated by the first stage of trickling filters, the water will pass through two intermediate clarifiers that allow the bacteria that wash of the first stage trickling filter rocks to settle out. The water continues on to the second stage trickling filters and the water then flows through another set of intermediate clarifiers that allows the bacteria from the second stage trickling filters to settle out.

 

At the end of this treatment process, almost 70% of the wastewater pollutants are removed. After the water has been treated in the trickling filter process, the water continues onto the activated sludge treatment process.

Activated Sludge & Aerations Basins

The activated sludge system is designed to convert the ammonia intro nitrates. After the wastewater leaves the two stage trickling filter system and the intermediate clarifiers any remaining organic material and ammonia left in the wastewater must be stabilized even further, and ammonia must be converted into nitrite.

The ammonia must be removed from the wastewater for two reasons:
• Ammonia is toxic to aquatic life in the Big Sioux River. The ammonia creates a huge oxygen demand in the River, for every pound of ammonia discharged into the Big Sioux River, requires 4.6 pounds of oxygen to stabilize into nitrate nitrogen. This would consume a lot of oxygen in the River that is needed by the fish and other aquatic life found swimming in the river.
• The Surface Water Discharge Permit issued by the State of South Dakota Department of Natural Resources, limits the amount of ammonia that can be discharged into the Big Sioux River.

The ammonia is converted to nitrates using a two-step biological process:

• The first step biologically converts the ammonia into nitrite, using Nitrosomonas bacteria,
• The second step bacterium converts the nitrite into nitrate, using Nitrobactor bacteria.

Once the ammonia is converted into the nitrate form, it is no longer toxic to aquatic wild life living in the Big Sioux River.

The organic material that is left over from the trickling filters that still needs to be removed is accomplished by using other bacteria that are populating the activated sludge system.

All of these bacteria require a lot of oxygen to accomplish these tasks of wastewater treatment. The water reclamation facility has four large mechanical blowers that can produce up to 15,520 cubic feet of air per minute, to supply all of the oxygen these bacteria need for the nitrification process and removal of the remaining organic material. On a typical day, only one blower is used to supply an adequate amount of oxygen to the activated sludge bacteria and occasionally a second blower is put in service if the organic loading on the plant increases for a sustained period of time.

Aeration Basin

The water reclamation facility has 6 aeration basins and each basin can hold up to 1,361,225 million gallons each and normally only 3 aeration basins are in service. The aeration basins house the activated sludge bacteria and are where all of the nitrification work and organic material removal is done.

There are also 4 final clarifiers that allow the activated sludge to settle out of the water, before the water proceeds to the effluent filters. Each final clarifier can hold 822,500 gallons of water.

 

Effluent filters

Effluent Filter Beds

After the water is finished with the activated sludge treatment process, it leaves the final clarifiers and flows into 8 effluent filters that use anthracite to remove the majority of any suspended solids, which are small organic particles still in the wastewater.

 

The water flows through a bed of anthracite filter media that acts like a strainer and the media is about 36 inches deep. A large portion of suspended solids are captured in the anthracite media and the clean water then flows onto the disinfection process.

Effluent Filter Building

As the water flows through the anthracite media, more and more suspended solids are captured in the media and those suspended solids must be removed on a regular basis, so the filters will not become plugged. The filters have a computer system that automatic determines when the filters need to be cleaned and this computer will initiate a filter cleaning process. Each filter can operate up to 48 hours, before a cleaning cycle needs to be performed. On some occasions, the filters can go as long as 72 hours, before being cleaned. After the water has been filtered, 98% of the wastewater pollutants have been removed.  

 

Disinfection

Sodium Hypochlorite Tanksr

After the water has been filtered in the effluent filters the next process is disinfection. The filtered water enters the chlorine contact chamber where sodium hypochlorite (Bleach) is added to disinfect the targeted bacteria and the targeted bacteria is fecal coliform. The Water Reclamation facility uses Sodium Hypochlorite, which is a very strong bleach solution at 12.5% strength; typical household bleach is usually 2% in strength. The Surface Water Discharge Permit mandates our daily average fecal coliform count must be less than 200 fecal colonies per 100 milliliters of sample collected.

Chlorine Contact Chamber

The disinfection process usually gets those fecal colonies to less than 32 colonies. The disinfection process protects the health and safety of people who may be swimming or enjoying other water sports in the Big Sioux River. The water typically stays in the chlorine contact chamber for up to 30 minutes for proper disinfection.

 

 

De-Chlorination

De-Chlorination

The Sodium Hypochlorite is hazardous to aquatic life and as the water leaves the chlorine contact chamber, it is dosed with a chemical called Sodium Bisulfite to remove any remaining bleach residual. This is referred to as the de-chlorination process and ensures the water leaving the disinfection process is completely safe to all aquatic life inhabiting the Big Sioux River.  

Post Aeration

Post Aeration

The final treatment process is Post Aeration and is a process of adding dissolved oxygen into the water, just before the treated water enters the Big Sioux River. The post aeration process “freshens” up the water making it even more hospitable for aquatic wildlife. The aeration process is done by letting all the water flow over a series of concrete steps that cause a splashing action that aerates the water as it bounces down the steps and is finally discharged into the Big Sioux River.

 

The Surface Water Discharge Permit sets a minimum limit of 5.0 mg/L of dissolved oxygen that must be in the water, before being discharged into the Big Sioux River. The post aeration process typically raises the dissolved oxygen level up to 10 mg/L.  

Wastewater Laboratory and Analysis

The Sioux Falls Water Reclamation Facility has an onsite laboratory that performs many analyses on samples collected throughout the treatment process. These analyses are used to determine the organic loading on the plant and can be used to diagnose and trend any adverse treatment anomalies as they occur. The laboratory data is formally submitted to the South Dakota Department of Natural Resources on a monthly basis to verify that the plant is performing in compliance with the Surface Water Discharge Permit.

Some of the typical laboratory analysis the lab team perform are:
• Biochemical Oxygen Demand Tests
• Carbon Biochemical Oxygen Demand Tests
• Chemical Oxygen Demand Tests:
• Total Suspended Solids
• Total Volatile Solids Tests
• Ammonia
• Fecal coliform
• E. coli
• Chlorine Residual

The laboratory team will also collect samples from local industrial dischargers, to determine their loading impacts on the Water Reclamation Facility.

Other tests are collected at various locations along the Big Sioux River to determine the condition of the water after storm events, or to set up profiles of various parameters like; E.coli, total suspended solids, biochemical oxygen demand tests, and ammonia levels.  

Design Parameters of the Sioux Falls Water Reclamation Facility

Design Parameters of the Sioux Falls Water Reclamation Facility